Blooming Flower Pumpkin Decoration Tutorial

I am SO into pumpkins this fall.  And all the pretty red, gold and orange flowers of the season too.  The more ways to decorate with them the better!  I had a simple idea for mixing the two and decided to give it a go this week.  My Blooming Flower Pumpkin: 



This simple project turns a basic craft foam pumpkin into a beautiful bursting blossom that adds some extra decorative color to the harvest pumpkin crate I did a few years back:



It's a fun way to bring more texture & a little something different (that is quick & easy to make too).  I added my pumpkin to my fall front porch decor. And unlike the real flowers & pumpkins, that have to be tossed out in a few short weeks, this can be enjoyed year after year:

It's especially good when you're short on time to craft, like I am, but still want to make a little something for the season:

Materials:

- Craft pumpkin

- Silk flower bunches with small, medium & large blooms

- Hot glue gun

I got several bunches of large and small silk sunflowers & mums:

Plucked them all off their stems and fired up my trusty hot glue gun:

Starting with the biggest blooms, I glued them intermittently around the pumpkin - sticking the centers in the "seams" of the pumpkin so they'd lay flatter and gluing any petal edges that still stuck up.

Then I filled in the gaps with the mums and smaller sunflowers, trying to keep the colors & styles alternating, but leaving the bottom uncovered so the pumpkin would stand flat.  That's it!

Now my pumpkin is bursting with texture & color and can be enjoyed year after year:

Happy Fall!!

Easy Craft Pumpkin Flower Tower Table Decor

 It's October and that means pumpkin season!  My Pumpkin Flower Tower is a simple way to add some pumpkin decor that will compliment any space: put it on a mantle or console table, use as a centerpiece - it would even look cute on a bathroom shelf or counter.

I paired mine with some wine & pomegranate colored candles and my DIY'd Fall Patchwork Ribbon Sign for a little fall-themed entryway decoration.

Layering in silk flowers that compliment with your room's pre-existing colors means it's easy to work that tricky pumpkin orange into any decor.  

My kids say it's like having a beautiful cake out on display and I'm inclined to agree!

  
Materials:

- Trio of foam craft pumpkins, small, medium & large

- Silk flower bunches with small, medium & large blooms

- Charger or plate

- Hot glue gun

Remove all the blossoms from the stems and sort by size:

Remove the stems from the bottom and center pumpkins - gently twisting and then pulling removes them from most foam styles.  Or just cut them off.

Arrange the largest blossoms on the charger so that they'll peek out from under the largest pumpkin.  Add some hot glue underneath each one to hold in place.

 Add a circle of hot glue to the bottom of the largest pumpkin and set on top of the blossoms.

Hot glue the medium pumpkin to the top of the largest pumpkin and the smallest on top of that to make the full tower.

Put a circle of hot glue at the base of each flower for the middle row:

 and press them into the space between the pumpkin layers. Repeat with the top tier.

 Hot glue a few leaves from the floral stems here & there for a more natural look.

Now the tower is ready to display!

It's really helped make our foyer look fall festive and transition beautifully into the neighboring living room's wine colored walls. 

Now whenever anyone comes in, there's a happy fall look to greet them!

Halloween Fabric Pumpkins & Molded Fabric Candy Bowl

Today I've got a double Halloween sewing tutorial to share: Fun Fabric Pumpkins & a Molded Fabric Candy Bowl.  I wanted to do a few fun Halloween projects besides costumes this year and these two are definitely enjoyable for just about any sewing level - even a beginner.

To make my molded fabric candy bowl I used something I'd been wanting to try for ages: Heat Moldable Stabilizer.  This project is SUPER easy and a lot of fun too.  

I know the fabric pumpkin thing isn't exactly new to the craft blog circuit, but I'd always wanted to make some and I did a few things differently (and a bit easier) than the other methods I'd seen.  Last year I did more Halloween crafts than sewing so this year I've turned my eye fabric instead.  I picked out a few Halloween prints by Timeless Treasures that I really liked to bring my holiday visions to life.  

Let's start with making a molded fabric bowl.  

Materials:
- 2 Fat quarters of cotton (I used Haunted House Cats & Spider Web Batik)
- Heat moldable double sided fusible stabilizer*
- 1 package double fold bias tape & matching thread
- Heavy duty sewing needle
- Iron & press cloth
- Shears/rotary cutter & mat

*The secret to making a molded bowl is the heat moldable stabilizer.  Once applied to a project, it can be heated and manipulated into hard-to-sew or molded shapes and it will cool and remain in said shape. I'd asked for some for Christmas (thank you shout out to my sister for getting it for me), but I'd been hoarding it until I had the right project/fabric combo. The one I used was double sided fusible called Inn-Spire Plus, but there are several brands out there and some are fusible, some are sew in.  I plan to buy a few more to try out and report on in the future because this stuff was so fun to use.

I totally loved this Haunted House Cats fabric.  I'm not even a cat person, but scaredy cats, cat ghosts and a mouse bat - what's not to like?  I thought it was so cute I had to make something with it and a festive candy bowl was perfect.   I cut a 16 inch circle from both my fabrics and the stabilizer.  The stabilizer is pretty firm & thick - think the cardboard on the back of pads of paper - so cutting takes a little muscle.  

Then I sandwiched my stabilizer between the wrong sides of the fabrics (fyi the spider web is the wrong side up - since it's batik, the design is on both sides):

I followed the directions on the stabilizer package to fuse everything together: iron on the wool setting with a damp press cloth between it & the fabric sandwich, holding it for about 15 seconds at a time, per section, until the whole things was fused.  Then I let it cool.  It was pretty rigid - couldn't bend it if I tried.

Next I sewed double fold bias tape around the edge.  I worked slowly and held it on by hand as I went.  The combination of fabrics+ is pretty thick & firm so using pins would be a bit tricky:

To finish, I turned the raw edge under at the end & overlapped it with my starting point:

Then it was time for the heat molding magic.  The package said you could use a hair dryer, heat gun or iron.  I found the iron to be the best at heating it up quickly & evenly.  I ironed all over, doing about 10 seconds at a time per section and on both sides which turns the stabilizer soft.  It had the hand and shape-ability of a thick felt.  It is important to work fast since it cools & hardens back up pretty quickly (within a minute). 

I molded the general fluted side-flat bottom shape over a bowl, but made 3 overlapping folds around the top to get a smooth shape:

To hold it down while it cooled I used a bigger bowl and let gravity do the rest:

After about 5 minutes it was rock hard again and my fabric circle was a real bowl. 

Now here is the best part - the first time I didn't get my folds equally spaced - grr!  However, that was ok because you can reheat and remold.  So while the shape is permanent in that it won't loosen up over time, it is re-shapeable if you need to make a change.  That kind of blew me away.  I was kicking myself a bit after realizing that because I'd thought it was a one-time shot to mold when I first got it, so I'd hoarded it all this time out of fear of wasting it or goofing up.  I could've been heat molding fabric all year long!!

Now, some easy-sew fabric pumpkins! 

Materials:
- 1/4-1/2yds of cotton (I used Mini Chevron Stripe in Boo, Allover Halloween and Halloween Stripe)
- Fiberfill
- Embroidery floss
- Roll of burlap
- Hot glue gun
- Optional: Small stones, hand sewing needle

I thought using some vibrant Halloween prints would be a bit different from the usual orange/earth tone versions I've seen.  Even the selvages were spooky cute on these:

I cut a trio of rectangles that would make finished pumpkins 4 inches, 7 1/2 inches and 9 inches high:

- 8 in x 16 in for the smallest
- 14 in x 24 in for the medium
- 18 in x 32 in for the largest

I folded each in half width-wise and sewed up the side with a 1/2 inch seam allowance:

I sewed two rows of basting stitches, 1/4 inch apart, about 1/2 inch from the raw edge on both sides of my tube:

I pulled up the bobbin threads and cinched things together on one end:

Then I pushed the gathered bit inside and tied it off to make the pumpkin bottom:

Then I started stuffing my pumpkins.  To keep them from rolling around (or my kids using them as toys when I'm not looking), I also added a few small stones for a solid foundation:

Once they were pretty full, I cinched up the tops, added a bit more fiberfill for fullness, and then tied the thread ends together.  I also did a few quick slipstitches to really close it up completely:

To section the pumpkins, I tied embroidery floss around the middle, pulling it pretty tight to segment and plump up the shape, and doubling it before knotting.  I did this 3 times to create 6 sections:

For the stems I used burlap that comes on a roll - the finished sides mean it won't fray up over time.

I cut a 10 inch piece and added a line of hot glue to each cut side and folded them inwards about 1/2 inch.

Then I rolled them up and added another strip of hot glue to hold my stems closed.

Last, I added a good helping of hot glue to one end and pushed the stems into place, adding a little more glue between the stems and fabric to really seat them in place.

And my pumpkin trio was complete to display with our new spooky treat bowl:

I was not financially compensated for this post.  I selected the fabrics shown , which were provided by Timeless Treasures to use as I wished.  The opinions and ideas are completely my own, based on my experiences with the materials mentioned.