Showing posts with label fabric basket. Show all posts
Showing posts with label fabric basket. Show all posts

Wednesday, April 17, 2019

FREE Pattern: Plush Bunny Easter Basket


Easter is coming up fast, but I've got one more project tutorial that can be made in time.  This one is cuddly, practical and fun all at the same time...my Plush Bunny Basket!


This basket is the perfect place to put all those Easter goodies.  


It's nice and deep so it can hold a lot.


He's got a fun bunny face and standup ears: 


And hoppy little feet.


There's even a fluffy bunny tail at the back!


The basket holds its shape well thanks to a sturdy foam interior, yet is still nice and soft.


The minky fabric outer and lining makes it cuddly for the little ones. With an active just turned one year old in the house, there are toys and baby things EVERYWHERE, so the more places I can toss them into the better!


Materials:
- 1/2 yd minky/cuddle fabric outer
- 1/2 yd pinky/cuddle fabric lining 
- 1 yd foam
- Hand sewing needle
- My FREE PDF Ears & Paws Pattern
Optional: safety eyes, white & pink felt, large pom pom 

Printing the Pattern:  Click HERE to download my PDF ear pattern & paw and print at 100% (actual size) no scaling.  Cut out pattern pieces (since the paws are a layered piece, cut the outer fabric pieces first, then trim down to cut the foam pieces).

Using my ear & paw pattern pieces, cut out fabrics and foam according to the directions.  
With right sides facing, stitch together the ear pairs and paw pairs with a 1/4 in seam allowance.  

Trim and turn right side out.  Insert the foam pieces inside.  


From the foam cut a 10 1/2 in diameter circle and a 9 in high by 34 in wide rectangle.

From both fabrics cut a 10 1/2 in diameter circle and 9 1/2 in high by 34 in wide rectangle.


Take the outer fabric rectangle and determine the center.  Pin the ears 3/4 of an inch from the center on either side and the paws 1 inch from the center as shown and baste to the main fabric.


If adding a face, now would be the time to set the safety eyes and stitch a triangle felt nose and whiskers on.  I decided to add mine after I'd made the basket so I had to hand stitch it all on.


Starting with the foam rectangle, bring the short sides together and stitch with a 1/2 inch seam allowance.  


Trim down the allowance and pin the circle to one of the circular ends.  Stitch together.


Turn right side out and set aside.  


Repeat this process with cuddle fabrics, except with the lining, when stitching the rectangle into a tube, leave a 4 inch gap and use a 3/8in seam allowance for everything (this will help the foam fit inside better).


With right sides facing and lining up the back seams, pin together the top raw edges of the lining and outer fabrics and stitch together with a 1/2in seam allowance.


Pull right side out through the opening in the lining.  


Fold up the foam basket form and insert into the lining gap.  Smoother the outer fabric around the foam and then the lining onto its inside.  Hand stitch the gap closed.  Hand stitch the pom pom tail onto the back.


Now this hoppy friend is ready for filling!





Tuesday, November 6, 2018

Fabric Cornucopia Tutorial and Fall Fabric Bundles Giveaway!


Hello sewing friends!  Are you ready for a double dose of fall fun?  Not only do I have a new sewing project that's great for Thanksgiving, but I'm giving away TWO bundles of amazing fall fabrics shown!



I got to work with some stunning fall hued Timeless Treasures fabrics for Team Timeless this month and came up with a fun & fabulous project for you.  Want to make a show stopping table topper for Thanksgiving this year?  Try my fabric cornucopia!



This three dimensional sewing project is stuffed to be just as substantial as a wicker version, but softer (and sweeter!):



And it's completely fillable, so you can add all those gourds, fruits and vegetables of the season for a harvest themed decoration!


It's a festive way to bring together lots of beautiful fall fabric designs too:


Finished size:

7 1/2"w x 7 1/2"h  x 12"l

Materials:
- Fabrics Used (all in Fat Quarter size):
  Shimmer Metallic -Rust
  Shimmer Metallic - Green
  Shimmer Metallic - Ivory
  Packed Pumpkins Harvest-CM6392-Cream
  Packed Pinecones and Leaves-CM6393-Autumn
  Fall Foliage-CM6391-Harvest
  Studio Basic-C3096-Brown
  Studio Basic-C3096-Citrus
  Studio Basic-C3096-Fire
-  4 yards 1" wide cotton cording
- Design ruler or French curve ruler
- Pins, rotary cutter

Cutting:

From the Shimmer Metallic - Green and the Studio Basic - Brown cut (1) strip 5 1/2" high by 24" wide.

From each of the remaining 7 fabrics, cut (1) strip 6" high by 24" wide.



Assembly: 

1. With right sides facing, stitch down the length of each strip using a 1/2" seam allowance to make the casing strips.  Turn right side out.


2. Press each strip so that the seam is in the center.


3. With seam sides facing outward, starting with the as the outside piece, begin stitching the sides of each casing strip together with a 1/4" seam allowance. Sew strips together in the following order:

Studio Basic - Brown
Fall Foliage
Shimmer Metallic - Rust
Studio Basic - Citrus
Packed Pumpkins
Shimmer Metallic - Ivory
Studio Basic - Fire
Packed Pinecones and Leaves 
Shimmer Metallic - Green


When all sewn together the wrong side should look like this:


4. With right sides facing fold in half.  Use a design ruler/French curve ruler to create a curved arc shape and cut through both layers with rotary cutter.


The cornucopia should be 2 1/2" while folded at the top end and is the full width (12" while folded) at the bottom:



When opened it should have a rounded bell shape:


5. Next take the cotton cording.  Measure and mark a length of cording for each fabric tube that is 1" smaller than the fabric tube's length.

Note: to keep the cut ends from fraying & opening when cut (which would make them more difficult to slide into the tube casings), tape around the area prior to cutting:


6. Cut each end on a 45 degree angle:


7. Snake each length through its corresponding fabric casing:


8. Leave 1/2" open space on either end of each casing for the seam allowance:


9. To finish, do a French seam by putting the raw edges together with the right sides facing out and pin close to the cording to keep it from shifting while sewing:


10. Stitch open edges together with a 1/4" seam allowance:


11. Trim down the seam and turn the cornucopia wrong side out.  Pin layers together and sew another 1/4" seam.  


Turn right side out and stuff with your favorite Thanksgiving gourds, pumpkins or fruits for a fabulous fabric cornucopia!



Now for the giveaway!

Each fabric bundle prize contains these beautiful metallic fall prints:


These gorgeous shimmer metallics:


And these vibrant Studio Basics:


There are two fabric bundle prizes: 
- One set of 1/2 yd cuts of all 9 fabrics 
- One set of fat quarter cuts of all 9 fabrics



Good Luck!  


LinkWithin

Related Posts with Thumbnails